SalesMate 4x3 Kit D

1. Are self-locking pop ups a good option for tension fabric pop ups? I have seen them advertised on other websites.

   Self-locking pop-ups are perfect for Velcro compatible fabrics and murals, but are not ideal for tension fabric graphics We use a frame with manual locks because it creates a more rigid structure which evenly pulls out any wrinkles or folds in the fabric graphic. The result is a taut flat graphic that mimics a hard panel graphic.

   Self-locking frames are fantastic when you have a rollable mural graphic or fabric panel with stiffener hardware. But when it comes to fabric pop-ups, steer clear of a self-locking pop up.
    

2. Can I ship the Xpressions Express in its hard rolling case?

   Yes and No. No, the Express kit is a rolling hard case that makes it convenient to transport and can be checked as airline luggage but it is not designed as a shipper. However, you can ship the kit if you retain the original cardboard counter.
    

3. After a few shows, my Xpressions skins are starting to get dirty from handling and the dirty show floor. What are my options?

   Rest easy. Xpressions skins are dye sublimated graphics and can be cleaned! Spot clean any specific areas or just throw them into the washing machine on cold with mild detergent. The skins will look like new again. Dry on very low heat or hang dry on the frame.
    

4. Four questions regarding the Xpressions Express.

   Is Xpressions Express case clear?
   
   Answer: No, the case is solid black. The clear case that appears on some literature was for demonstration purposes only.

   Is there room in the Xpressions Express case for literature?
   
   Answer: There is some extra room in the case but it’s very limited. The display was designed to be light weight so that the display could be checked as luggage on an airplane and not exceed the 50 lb limit. Adding literature may cause the unit to exceed that limit.

   What is the advantage of having the back wall as two 1x3 units instead of a single 3x3?

   Answer: There are several advantages. First, eliminating the center hardware reduces the price of the unit and cuts down on the weight. Second, the design allows more versatility. The unit can be used as a full back wall or as two merchandizing units. The 1x3 unit can be placed on its side and used as a table top unit on an 8’ table.

   Can existing Xpressions XSnap frames be retro-fitted with the special shelf-hub?

   Answer: Yes. Simply contact your account representative and explain your request. You may be able to do this yourself or it may require sending your frame out for refitting. Keep in mind that only the Xpressions Express unique shelves work with the clip to connect two 1x3s. These shelves are available for individual sale. Two shelves are required to connect 1x3 snaps.
    

5. I get asked all the time about wrinkles in tension fabric pop-ups and how to eliminate them.

   Fabric will wrinkle and fold lines may appear if a fabric graphic has been stored or folded for a long time, but the wrinkles are not permanent. Whenever possible, always store your displays set-up. Many people have their display set-up in the company waiting or conference room!

   Use a good quality fabric on a structure (like Vburst) that when set-up pulls the wrinkles out of the fabric. Carry a small travel steamer in your display case. These are inexpensive and simple to use. The steamers can lift out any remaining wrinkles after your set-up.
    

6. What is the warranty on fabric pop ups?

   All fabric pop ups have a lifetime warranty on all hardware products. The policy applies to original purchaser. No product registration is required. We will replace or repair all hardware supplied to our customers purchased after 7/7/09. However, we reserve the right to inspect hardware and exclude warranty claims that have resulted from vandalism, theft, negligence, fire, natural disasters, modifications, or losses in shipment that may be covered by your insurance and/or freight carrier. The lifetime hardware warranty does not apply to graphics or to electrical components.
   
   All shipping costs are the responsibility of the customer.
    

7. How do you clean dye sublimation fabric graphics?

   We recommend washing in your washing machine, cold setting, with a mild detergent and letting air dry.  Please do NOT dry clean.

The lead time for the SalesMate 4x3 Kit D is Contact Your Distributor.

• Production lead times are based on business days and DO NOT include any shipping days.
• Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
• No order will be released to Production without a signed order confirmation.
• Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
• Shorter lead times may be available based on schedule openings in Customer Service and Production. Rush charges may apply.
• Standard lead times do not apply to orders of multiple quantities.
• Please check for product availability on ALL RENTAL exhibits.

Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:

• Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
• Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
• Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
• Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.

For more information about exhibit weights and freight options, please contact your local exhibit representative.

Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:

• Inline vs. Island Displays
• Lead Retrieval Devices
• Computer and Monitor Cables
• Demo Equipment
• Overhead Lighting
• Grommets and Grommet Placement in Counters
• Overhead vs. Floor Power Supply
• Flooring and Electrical Wiring
• Options for Hiding Cords and Cables
• Flat vs. Round Electrical Cords
• Multi-Plug Outlets and Extension Cords

By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.